|
PTFE Molding Powder (SF-5GL5M)
Composition: 90% virgin PTFE, 5%±1% glass fiber, 5%±0.5% molybdenum disulfide
Technical Properties
| Mechanical Properties | Units | Test Method | Free Flow | NFF |
| Specific Gravity | g/cm³ | ASTM D4894 | 2.22±0.02 | 2.22±0.02 |
| Tensile strength | MPa | ASTM D4894 | ≥20 | ≥22 |
| Elongation at break | % | ASTM D4894 | ≥240 | ≥260 |
| Bulk Density | g/L | ASTM D4894 | 780-870 | / |
| Hardness | Shore D | NEEDLE | 58-54 | 58-54 |
| Diametric Shrinkage | % | INTERNAL | 2.0±0.5 | 2.0±0.5 |
| Flow | Sec/120g | INTERNAL | ≤5 | / |
| Average Particle Size | μm | ASTM D4894 | 550±100 | / |
| Recommended Molding Pressure | 300-350kg/cm2 | |||
| Max Sintering Temp. | 370-375℃ | |||
Attention:
This product is a fluoroplastic material. Normal precautions observed with fluoroplastics should be followed.
Packaging, Storage and Transportation:
1. The product is packed in two layers of plastic bags in a hard bucket with a net content of 25kg per barrel.
2. The products shall be transported as non-dangerous chemical. During transportation, prevent from humidity, intense vibration and package damage.
3. Products should be stored in a clean, cool and dry warehouse to prevent the mixing of dust, moisture and other impurities.
Contact Person: Mr. Liu
